Rough to Release

Hang in there buddy, we're nearly at the end, but I have had to split this into two parts. We'll get to copyright and distribution next time. Mastering On the wider internet there is a fair bit of nonsense spoken about what mastering is and why it is, or isn't, important. Let's unpack some of that now (in a somewhat simplified way) so we can get to our goal of finishing and releasing our song. In the Good* Old Days (TM)  a mastering engineer's primary job was to take a recording and make sure it was in good shape to be transferred to the physical medium it was going to be distributed on. With vinyl this meant understanding a great deal about the physical limitations of the medium and how that affected things like low frequency extension, loudness and even where on the record certain songs needed to go because of the difference between the edge and centre of the record. They would also, therefore, need to understand how to work within these limitations without ruinin...

 OK, so we've written the song, established the creative vision, recorded all the parts, and deleted half of them. Now we just need to mix it all together.  Easy right? Guess what, I've got another book recommendation for you... The companion to Recording Secrets is Mike Senior's Mixing Secrets for the Small Studio . Now I'm obviously not going to attempt to summarise an entire book / career into a blog post, but for the purposes of finishing our songs, here are a few suggestions about approaches. Lo Fidelity I'll start with a mistake I made when I first started to think about my recording and mixing in a more detailed way than 'stick a mic in front of it and plug it into the 4-track. The mistake I made was in chasing fidelity. I reasoned that if I wanted to create a recording that sounded like a bunch of real instruments then I should start by making each instrument sound as much like the real thing as possible. Then mixing should just be a case of setting the ...